Fundraiser
Madeforall, has done a fundraiser. To pull off this fundraiser, Madeforall has partnered with two charities, Africa ICT Right and Computer Aid.
Africa ICT Right is a "ICT-oriented nonprofit organization dedicated to bridging the digital divide by building a more equitable and technologically advanced future for all." - Check them out at https://africaictright.org/
Computer Aid's is a nonprofit whose mission statement is: "Our mission is to bridge the digital divide and to use digital technologies to help overcome disadvantage – and to do so in environmentally friendly ways. In part, we do this by providing an IT disposal service for companies and organisations. Our service seeks to reuse as much as possible and in so doing reduces the carbon footprint of the assets." Check them out at https://www.computeraid.org/
We also had a giveaway featuring many of the latest technology like Macbook Pro 13 inch - Model A1706 - Silver, Macbook Air 13 inch M2 - Model A2681 - Space Gray, Macbook Air 13 inch M1 - Model - Space Gray.
Tech Drive
In the local west windsor/princeton area madeforall is hosting a community tech drive aimed at getting donations of old keyboards, mice and other computer acessories. After collecting these keyboards and other acessories, we refurbish and clean these to make them usable again. We give a second life to keyboards and mice that otherwise may have been discarded.
For this drive, we have partnered with local libraries and makerspaces to set up places where anyone can pick and collect keyboards and mice when they need it. Libraries like the hamilton public library and willingsbro public library are a few of the places we have partnered with.
Partnerships
Madeforall has also partnered with world computer exchange to bring our impact across the globe. We have collected, refurbished and cleaned keyboards and mice for world computer exchange.
Projects
Madeforall has made a few keyboard projects that we have made open source for all.
We upload these projects in hopes of bring more people to the keyboard hobby, of which madeforall has it's roots in. We hope you enjoy the projects we upload onto this account.
Disclaimer:
All projects are free and open source for anyone to use and change. However, we do not want anyone selling or distributing our projects for profit. These projects can be made at the risk of the owner. Madeforall is not liable for malfunctioning projects and the damages incurred.
Please use caution when creating using designs taken from the internet.
Below is our profile page, check in regularly for more projects!
Below are our individual projects:
https://github.com/madeforall/saltus
-
About saltus: Saltus is a tree themed frl, tkl with 6 extra macros on the lefthand side as well as a big knob on the side. This project has been marked as completed. The files provided in this repo are the files needed to create this keyboard.
https://github.com/madeforall/Lube-Machine-Mech
-
This is a second go at a semi auto lube machine. The bottom housing of a switch is placed on the switch holder. Stepper motors are then used to move a syringe that dispenses lube onto bottom housing. Code is nessisary for this project, email us about getting that and more details. This was by far the project that took the most time, it was abandoned becuase there was little end in sight. Many optimization changes need to be made to make this worthwhile. We do believe this design is viable and has potential though.
https://github.com/madeforall/Lube-Machine
-
About Lube Machine - Vertrel: This lube machine is a semi automatic lube machine. Switches are placed in the basin and sandwiched by 2 silicone layers. That is then sandwiched by the last layer. Vertrel XF should be mixed with any lube and poured in the machine. Wait until vertrel is evaporated, flip and repeat. https://youtu.be/zgfKnyQwXqQ
https://github.com/madeforall/Break-In-Machine
-
About Break-In-Machine: This break in machine is a 36 key break in machine. Only stls are provided and this project is marked as completed. The break in machine requires a motor. The motor used for this machine is no longer avaible, the motor linked below should work although some changes to design may be necessary. motor Basic eletronics knowledge will be needed to make this.
https://github.com/madeforall/barbool
-
Variation of case of the carpool. This is just a case meant for a custom layout. There is no pcb, nor is there plans to make a pcb for this. If someone wants to use this, they would need to make thier own pcb.
https://github.com/madeforall/sound-tkl
-
About sound-tkl: sound-tkl is a tkl keyboard with a wooden soundboard in it. The soundboard was an experimental idea added to allow for a deeper noise when typing. This project is not complete, does not have a pcb and still needs editing.
https://github.com/madeforall/f13-tkl
-
About f13-tkl: the f13-tkl is just that, a TKL keyboard with an F13 key. This project has been marked as completed although no PCB has been added, commerically avaible PCB's with an F13 key should work. Please check dimensions to confirm.
https://github.com/madeforall/TKL
-
About TKL: the TKL is just that, a TKL keyboard . This project has been marked as completed although no PCB has been added, commerically avaible TKL PCB's. Please check dimensions to confirm.
https://github.com/madeforall/Cherry-MX-Stem
-
About this - This is the model of a standard Cherry MX stem. The specfic dimensions where taken from a gateron red.
Render of Saltus
Links
Coming soon
Coming soon:
Monotech - a playful, tech inspired deskmat - in redscale, bluescale, greyscale
